|
When two or more cranes are working at close range (inferior to the respective jib lengths sum) in the same building yard can interfere each other. The following precautions must be taken:
- Jibs must be offset to avoid collision of any structural parts considering the maximum oscillation amplitude and a reasonable safety distance.
- The minimum distance between the two cranes must anyhow be great enough to prevent the cables and loads of the higher crane from interfering with the lower crane.
- In case of interfering cranes electrical or radar anti-collision devices can be installed to limit the crane working range. Always consult the manufacturer for the installation of this Safety Device, once ascertained it really serves the purpose.
RC-A11-Ⅱ Tower Crane Multifunctional Safety Monitoring System The system integrated Load Moment Indicator with anti-collision&Zone Protection System and remote online monitoring system.It indicates real time working states of tower crane and tower crane group both on tower crane and on the line computer. In the meantime it combines functions including black box,anti-collision&zone protection(to provide remote video monitor and control system when to update).The system is applicable to various types of level-jib and luffing Tower Cranes. |
Remember that cranes must be always staggered in height to avoid any interference when under no-working conditions.
|
|
CONTACT US :
Tel: 0086 024 26210512
Email: bq@bq-sy.com
Web: www.bq-sy.com
Subscribe To Our Newsletter:
Get Updates, Discounts, Special
Offers and Big Prizes!