requirements for installing the construction hoist

August 30, 2022

1. Clean the erection site and fence it with railings. No admittance except on business, forbid constructing operation above the Construction Hoist when installing to prevent anything fall down to the erection site.
2. There must be the person who has specific duty for installation.
3. Strictly forbid operating the Passenger Hoist by non-working person during installing.
4. Operating hoist must be at the roof of Passenger Hoist Cage, don’t operate it in cage.
5. The installation can not be done when snow, storm and the wind speed exceeding 13m/s.
6. The lifting device is only use for installing and dismounting parts of hoist and can not be permitted overload.
7. Don’t stand under the lifting device during the device is working.
8. Don’t move the cage when something is on the lifting device.
9. Person’s head and hand can not be out of the safety railing when the hoist is operating.
10. Forbid starting the hoist when someone is working at mast or tie-in; None be allowed to go into the enclosure when the cage goes up.
11. Inspect every parts before the hoist is started.
12. During installation, the load of hoist must be less than the rated load.
13. Do not forget tighten connecting bolts of Mast Section and tie-in.
14. Inspect and adjust verticality of mast when installing tie-in.
15. After installation, lubricate according to manual.

Bq Construction Hoist Bq Construction Hoists

The above is the requirements for installing the construction hoist we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Preparation before installation of passenger hoist

Next:Tower Crane Supplier from China

SHEN YANG BAOQUAN BUSINESS CO., LTD

requirements for installing the construction hoist