Hot Dip Galvanized Mast Section for Construction Hoist

Construction Hoist Parts : Hot Dip Galvanized Mast Section

Introduction of Construction Hoist Mast Section

Mast Section: material is Q345B high frequency welding pipe, high strength , good wearability and good straightness. Avoided the phenomenon of wall thickness is not uniform, linear degree is bad when originally used seamless steel tube, and ensure the flatness of mast section within 0.2mm, straightness within 0.6mm.

Each section is 1508mm long and provided with one rack for single cage hoist or two racks for twin cage hoist.
The sections are bolted together with screws and nuts to form mast. The mast is tied to the building with wall tie and is the guide rail of the cage. Painting or Zinc Plated Mast Section according to your need. Galvanized Construction Hoist Mast Section is hot dip galvanized.

Construction Hoist Mast Section Painting Type:

Construction Hoist Mast Section Hot Dip Galvanized Type :

Features of SC Series Construction Hoist Mast Section
a. The Construction Hoist Mast Section is welded by robot, and there is rarely deformation of the mast section mode.
b. horizontal brace is U-shaped steel plate and the diameter of diagonal bracing is φ20, it will be more firm than other companies'. Thickness 5mm welded steel tube Q345B (Seamless steel tube 20# is also available):Ø76×4.5mm or Ø76×6mm (Thickness of 6mm or 8mm is also available)

Other Hoist Steel Structure Parts:

Passenger Hoist Cage

Construction Hoist Wall Tie

Product Categories : Construction Hoist Parts > Construction Hoist Steel Structure